formulation library
431 Wax
Formulated to give a natural look to wooden floors. Easy to
apply and buffs to a patina sheen.
62 Oil Stains
Light fast oil stains for furniture or flooring. Can be
over-coated with varnish or lacquer.
62 Wax
Traditional toluene based wax polish for finishing
furniture. Very quick drying, can be buffed to a very high gloss. Manufactured
in the UK by FLAG Paints Ltd.
Acid Etch Solution
Acid Etch Solution is a pre-treatment for concrete power
floated or very smooth concrete floors. The Acid Etch Solution opens the
pores of the concrete and prepares the surface to accept its next treatment,
allowing excellent adhesion. Coverage: Approx. 20 sq. meters per litre.
Alkali Resisting Primer
An off-white primer of very low lead content for brush or
spray application. Designed for cementitious type surfaces with an alkaline
nature.
Aluminium Gloss
Bright Aluminium high gloss finish is based on a high
quality alkyd resin system suitable for interior and exterior use. This product
achieves a high standard finish giving excellent durability. Manufactured in
the UK by FLAG Paints Ltd.
Aluminium Primer
A multi purpose primer. Particularly valuable in minimising
"bleeding" on the more resinous types of timber. Formulated to seal
knots and prevent resin seepage, This primer is ideal for both interior and
exterior applications. The original self-knotting primer which for many years
has proved the most successful product of its kind.
Anti Corrosive QD Metal Primer
High build quick air-drying oxide primer for use on ferrous
metals, provides good protection prior to over coating with most solvent based
finishing products. Suitable for a wide variety of applications where speed and
ease of application are required. Compatible with FLAG Hammer Finish and FLAG
Smooth Metal paints.
Anti Rugine (Black)
High quality one coat anti-rust metal paint. Based on
Micaceous Iron Oxide. This high build primer is suitable either for brushing or
spraying purposes. Provides excellent adhesion to ferrous metals and imparts
good water resistance. Manufactured in the UK by FLAG Paints Ltd.
Anti Slip Garage Floor Paint 2.5L
A very hard wearing single pack water based acrylic paint
designed to seal and colour and protect concrete floors. Contains a built in
special purpose fine aggregate that provides anti-slip* properties. Theoretical
spreading rate 10 - 12 sq.metres per litre. *Important Note: This product
has anti-slip properties and therefore provides slip resistance, however, it is
not possible to guarantee a totally non-slip surface. Manufactured in the UK by
FLAG Paints Ltd.
Anti Slip PU Floor Paint 5L & 20L
Anti slip polyurethane floor paint based on a high quality
resin system with a very fine textured finish. It is suitable for application
to most surfaces and will provide a hard wearing, water and oil resistant
finish, this product is ideal for general walkways, factory and garage floors.
*Important Note: This product has anti-slip properties and therefore provides
slip resistance, however, it is not possible to guarantee a totally non-slip
surface. Manufactured in the UK by FLAG Paints Ltd
Anti Slip PU Floor Paint (Yellow) 5L & 20L
FLAG Anti Slip PU Floor Paint (Safety Yellow) is a heavy
duty, quick drying polyurethane paint with a durable, chemical resistant and
slip resistant finish. Ideal for high visibility safety markings. Anti slip PU
floor paint (PU is an abbreviation of polyurethane) based on a high quality
resin system with a very fine textured finish. It is suitable for application
to most surfaces and will provide a hard wearing, water and oil resistant
finish, this product is ideal for general walkways, factory and garage floors.
*Important Note: This product has anti-slip properties and therefore provides
slip resistance, however, it is not possible to guarantee a totally non-slip
surface. Manufactured in the UK by FLAG Paints Ltd
Apexior 1
Apexior No.1 is a special graphite/bitumen compound,
designed to act as an anti-corrosive coating for metal surfaces in continuous
contact with hot water above 93°C (200°F). It has also been proven to be
unaffected by steam reaching temperatures of 540°C (1004°F) while actually
improving the boiling characteristics/steam generation patterns of the
boiler/plant in which it is used. Indeed it has been shown that heat
transmission is increased by up to 35% by the use of this product, giving real
energy efficiency and cost savings. It is very easy to apply and maintain and
imparts no smell, or discolouration to liquids with which it comes into
contact.
Apexior 3
Apexior No.3, is an ideal anti-corrosive coating for metal
surfaces in continuous contact with fresh or salt water at temperatures up to
52°C (125°F). To add to its versatility, Apexior No.3 also has a wide range of
marine applications and is resistant to dry heat up to 232°C (450°F). It is as
easy to apply and maintain as Apexior No.1 and shares the same properties - it
to imparts no smell or discolouration to liquid. Price on request.
Aqualac (Standard and PU) 2.5L & 5L
AQA/AQ
FLAG Paints Ltd are proud to introduce Aqualac, single pack
acrylic and polyurethane water-based coatings for use on all new and old wood,
including floors and furniture.
AQUALAC for use on domestic and light traffic floors. A
durable acrylic water-based clear coating. Easy to apply, quick drying,
creating a beautiful non-yellowing finish. This product is ring resistant,
which means it can tolerate hot cups. Also resistant to alcohol spills.
AQUALAC PU the ultimate heavy-duty water based floor
lacquer. Quick drying, non-toxic, low odour non-yellowing easy to apply, giving
a very durable scuff resistant finish. Ideal for high quality furniture, dance
floors, sports halls and very heavy foot traffic areas. This product is ring
resistant, which means it can tolerate hot cups. Also resistant to alcohol
spills. Conforms to BS5665 (Safety for Toys), click here to view the
certificate.
AQUALAC JOINT FILLER Clear Quick drying joint filler for use
prior to applying Aqualac floor finish. After sanding, sawdust can be mixed
with joint filler to fill larger joints and general imperfections to give a
natural finish. (Important note this product is solvent/cellulose based)
AquaPolish 5L
A water-based wax for use as a reviver for wood floors which
have been coated with Aqualac water-based lacquer. (This product is currently
only available as a made to order bulk item).
Asipo (Anti Mould) Algicidal Treatment
A clear single pack water-borne algicidal wash. For use as a
surface biocide. A very effective biocide to clean and protect against mould,
lichens and algae. Suitable for use on internal and external areas, including
ceiling and walls, garden paths, patios, driveways and roofs. Long term
protection against re-growth. Simple to apply. Can be over-coated with most
conventional paints. For further protection overcoat the treated areas with
Asipo paints. Dilute with 4 parts water to 1 part Asipo Algicidal Treatment.
Manufactured in the UK by FLAG Paints Ltd.
Asipo All Weather Coating 5L
Pliolite based reinforced, flexible, micro-porous coating
with excellent self cleaning properties.
Asipo Barrier 5L
Part of the Asipo system. To form a barrier within the
plaster to prevent mould spores from reappearing.
Asipo Dampstain Proofer 5L
Part of the Asipo system. To seal the surface and prevent
stains coming through decoration. Normally a special order only item.
Asipo Fine Texture Masonry Paint 5L
A superior water-based decorative emulsion for external use.
Provides long term protection against mould and algae. Normally a special order
only product.
Asipo (Anti Mould) Internal Matt
AS5000
The Asipo range has been specially formulated for use in
high risk areas where humidity and condensation can lead to the growth of mould
and algae. Asipo Internal is a superior water-based decorative emulsion for
combating internal problems of mould growth. This product provides long-term
protection from mould and algae and is designed to stop contamination and
discolouration. Asipo Internal is an economical solution but a high quality
product. Easy to apply, providing a long lasting durable finish. Manufactured
in the UK by FLAG Paints Ltd.
Asipo (Anti Mould) Internal Silk 5
The Asipo range has been specially formulated for use in
high risk areas where humidity and condensation can lead to the growth of mould
and algae. Asipo Internal is a superior water-based decorative emulsion for
combating internal problems of mould growth. This product provides long-term
protection from mould and algae and is designed to stop contamination and
discolouration. Asipo Internal is an economical solution but a high quality
product. Easy to apply, providing a long lasting durable finish. Manufactured
in the UK by FLAG Paints Ltd.
Asiposeal 5L
Non-silicone based, single pack solvent-borne protective
coating. Clear coating used to seal external masonry areas. Proven effective to
stop water penetration. Provides long-term protection against surface
contamination by air-borne spores. Manufactured in the UK by FLAG Paints Ltd.
Best White Polish 5L
Made from bleached shellac but still contains the natural
shellac wax, giving it a traditional creamy white colour. This polish is for
use on very light coloured woods or for sealing in wood dyes before waxing.
Manufactured in the UK by FLAG Paints Ltd.
Black Board Paint (Matt Black)
A matt black finish suitable for wood/metal, also ideal for
coating or re-coating traditional blackboards or pin boards. A high quality
traditional solvent based paint. Manufactured in the UK by FLAG Paints.
Black Bituminous Paint 5L
Black bitumen is based on a high quality bitumen that's
dissolved in a special blend of petroleum solvents. It provides excellent
protection against anti-rust, waterproofing and has good resistance to diluted
acids and alkalis on a wide range of materials especially iron and steel.
Conform to B.S. 3416:1988 TYPE 2 Use for protecting and preserving iron and
steel fabrications, iron castings, timber, concrete. Including rainwater pipes
and guttering, railings, corrugated iron sheets, roofs, manhole covers, storage
tanks, pipe work, piling, concrete posts and fencing. Car, caravan and vehicle
chassis work. Agricultural buildings, barns etc. Suitable for drinking water
tanks, interior and exterior if used in accordance with B.S. instructions.
Manufactured in the UK by FLAG Paints Ltd.
Black Magic (Various Sizes)
Black Magic adheres very well to metal, plastic and glass.
It provides a very tough finish with minimal brush marks. It is very easy to
apply and provides a very tough finish in just one coat. Black Magic also
contains a built in rust converter to neutralize rust. Rust is converted to a
polymer that is absorbed into the Black Magic. Rust is encapsulated into the
Black Magic and becomes a stable part of the tough coating. Black Magic
provides ongoing protection against further rusting. This product is an environmentally
friendly, water-based, quick drying, low odour with a high performance coating.
Manufactured in the UK by FLAG Paints Ltd.
Black Polish 500ml & 5L
Black polish for staining and french polishing furniture.
Normally a special order only product.
Boiled Linseed Oil 500ml & 5L
A natural vegatable oil similar to raw linseed oil but with
drying qualities. Used for feeding dry wood or for sealing unglazed terracotta
tiles. Manufactured in the UK by FLAG Paints Ltd.
Brush Polish 500ml & 5L
Heavy duty brushing quality French polish for uses on small
areas where conventional french polishing proves to be difficult. Manufactured
in the UK by FLAG Paints Ltd.
brush polish
Chlorinated Rubber 5L
A very hard-wearing chemically resistant paint. Ideal where
conditions require a degree of chemical and water resistance typical examples
would be swimming pools, manhole covers and metal tanks. It is also excellent
for road markings where high visibility and durability is a must. For concrete
and ferrous metals. Suitable for road markings tank lining & manhole
covers. Theoretical spreading rate 15 sq. metres per litre. Manufactured in the
UK by FLAG Paints Ltd.
Classic Wax
450ml
Specially
formulated wax for finishing and enhancing pine and solid wood furniture. Easy
to apply, giving a natural and pleasing look. A high quality traditional
recipe. Also suitable for use with traditional chalk paints to provide a sheen
and increased durability. Theoretical
coverage 1L covers approx. 8 – 10 sq. metres (please ensure to scale the
coverage for various available sizes) Manufactured in the UK by FLAG Paints
Ltd.
Chalk Paint 1L
& 110ml
Colourman Chalk
Paints provide a milky/matt finish. They are ideal for achieving various
effects and finishes from distressed furniture to crackle glazing, interior
decoration and replicating a lime wash finish.
Manufactured
from natural earth pigments fortified with china clay and aqueous resins, these
paints reproduce the traditional effects associated with the traditional chalk
paints of the 18th and 19th century, recreating that lovely flat chalk like
finish. Invaluable for the interior decorator, cabinet maker, restorer,
architect and home owner for creating those soft natural finishes seen on old
pine furniture and in old properties decorated with lime wash.
Concrete Sealer
5L
Clear coating
used to seal concrete floors, walls and block paving driveways. Theoretical
spreading rate 16 sq. metres per litre. Manufactured in the UK by FLAG Paints
Ltd.
Creamy Beeswax
250ml
WACB00
High quality
traditional recipe containing only pure beeswax and genuine turpentine. Revives
and enriches the natural patina wooden furniture to create a deep rich sheen.
Suitable of all types of timber. Polishes and cleans, leaves a distinctive
aroma. Manufactured in the UK by FLAG Paints Ltd.
Danish Oil
500ml & 5L
High quality
traditional Danish Oil. Water resistant finish/seal for wooden furniture,
kitchen worktops and doors. Provides a hard and durable water resistant finish.
Manufactured in the UK by FLAG Paints Ltd.
Emulsion Glaze
2.5L & 5L
A milk white
emulsion which dries to a glass clear film. Suitable as a clear sealer on
brickwork, plaster, cement etc. Can also be used as a clear finish over
existing emulsion paints to produce a high gloss finish with improved
washability. Specialist application for use in scenery production.
FLAG
Antifouling Thinner 1L (No3)
No3 thinner for
use with FLAG Antifoulings and FLAG Marine Primers. Use for cleaning brushes
and equipment also. Not suitable for FLAG Performance PTFE, CopperQuick or FLAG
Racing Glide. Manufactured in the UK by FLAG Paints Ltd.
FLAG Bilge
Paint 1L
One coat paint
for all internal surfaces, ideal for bilge areas, giving good resistance to
oil, grease, salt water and fresh water. (picture for illustration purposes
only). Theoretical spreading rate 10 -12 sq.metres per litre. Manufactured in
the UK by FLAG Paints Ltd.
Flag Cruising
Anti Fouling 2.5L
Copper based
antifouling free from booster biocides.
This is an economical (cruising grade) self eroding antifouling with proven performance within a
wide variety of UK conditions and many
European locations. Proven to create less 'build up' than many traditional antifoulings.
Theoretical spreading rate 10 sq. metres
per litre. Manufactured in the UK by FLAG Paints Ltd.
FLAG
Multi-Purpose Metallic Primer 2.5L
Universal grey
metallic primer suitable for above and below the waterline on all substrates
with good waterproofing and corrosion resisting performance. Also suitable as a
primer or barrier coat under FLAG and other traditional antifoulings.
Theoretical spreading rate: 12sq.metres per litre. Manufactured in the UK by
FLAG Paints Ltd.
FLAG
Performance Extra Antifouling 2.5L
Copper based
antifouling. FLAG Performance Extra Antifouling is semi-hard to enable use in
most craft up to 40 knots but still able to refresh its surface with some mild
erosion. Proven performance for all types fouling in all waters. Theoretical
spreading rate: 10 sq.metres per litre. Manufactured in the UK by FLAG Paints
Ltd.
FLAG
CopperQuick Antifouling 2.5L
Uses the
metallic copper binding with PTFE based resin to also reduce hull friction and
the chance of marine organisms getting a hold. Being a ‘hard’ antifouling it
can also be burnished for a racing finish. The paint comes premixed (although
it requires thorough stirring before and during use), can be applied over most
other ‘hard’ antifoulings and is extremely cost effective. It is therefore
suitable for racing, cruising, sail, power, high speed, drying moorings,
trailer boats, sea and fresh water. (Currently only available as a made to
order bulk item).
FLAG Classic
Wax (For Marine) 450ml
Specially
formulated wax for finishing and enhancing. Suitable for polishing boat
hulls/topside areas. Easy to apply, giving a natural polished look. A high
quality traditional recipe. Manufactured in the UK by FLAG Paints Ltd.
Flagspeed
Machinery Enamel 5L
Flagspeed
machinery enamel is based on high quality polyurethane, which gives good
exterior durability, an appropriate primer is recommended. This is a tough
industrial paint with rapid drying properties which permit short down times
when painting machinery and rapid handling of components after painting.
Normally a special order only item.
Floor Wax 2.5L
Traditional
blend of waxes, to enhance and protect wooden floors. Provides slip resistant
properties. Coverage: 8-10m² per litre.Formulated to give a natural look to
wooden floors. Easy to apply and buffs to a patina sheen. Manufactured in the
UK by FLAG Paints Ltd.
Floxtone
(White) 5L
For application
on external greenhouse areas to prevent too much heat entering during summer
months. Designed to harmlessly wash away during winter facilitating a more
constant all year round temperature. Manufactured in the UK by FLAG Paints Ltd.
Normally only
available as a special order product.
French Polish
500ml & 5L
French polish
for use on dark woods, or where light woods need to be slightly coloured. Can
be mixed with transparent, or white polish, to provide a hint of colour.
Manufactured in the UK by FLAG Paints Ltd.
Furniture
Cleaner 500ml & 5L
Cleans and
degreases furniture. A mixture of traditional oils & solvents. Removes
old wax, grime & fade marks. Avoids damage to original hard finishes.
Manufactured in the UK by FLAG Paints Ltd. A special order (batch quantity)
item.
Garnet Polish
500ml & 5L
Dark polish for
use on dark wood surfaces. To enhance the natural patina. Manufactured in the
UK by FLAG Paints Ltd.
General Purpose
Varnish 2.5L
Flexible gloss
general purpose varnish, good exterior durability. Normally a special order
only item.
Genuine Pure Turpentine 5L
Genuine Pure Turpentine is a traditional solvent distilled
from the oleo resin of the pine tree. It is also known as Genuine Gum
Turpentine. Manufactured in the UK by FLAG Paints Ltd.
Gilt Wax
Metallic paste wax for gilding picture frames, antiques,
furniture, ornaments and general artefacts. For bronzing, gilding, ageing,
high-lighting, distressing and other special effects. Coverage information is
not provided because of the sporadic nature of special effect applications. For
guidance only the theoretical spreading rate is approximately 8 sq. metres per
litre. Normally a special order only item. It may be available here:
Gloss Paint (White) 1L & 2.5L
A superior alkyd topcoat reinforced with polyurethane resin.
For all general wood and metal surfaces. Undercoat with FLAG Trade
Primer/Undercoat. For interior and exterior use. Manufactured in the UK by FLAG
Paints Ltd. Coverage 15 sq. m. per litre.
Grass Line Marking Paint 10L add bio based
A high-quality concentrate grass marking paint. This
heavy-duty product is formulated for ease of application and is suitable for
various types of spray and transfer wheel equipment, hand application is also
possible for logos and advertising graphics. This product provides a dense and
bright line that has maximum wearing durability.
Hammer Finish Paint
Quick drying paint to give a hammer finish to metal
substrates. Easy to apply. Compatible with FLAG Anti Corrosive QD Primer.
Excellent corrosion resistant properties. Semi-gloss finish. Coverage: 5m² per
500ml. This product is normally a special order item (with minimum order
quantities) but some excess stock may be available in QuickBuy.
Heavy Duty Elastomeric Floor Coating (Anti Slip) 2.5L
A blend of high quality thermo-acrylic and polyurethane
resins resulting in a heavy duty coating that offers excellent protection for
high traffic areas. This product is Elastomeric and therefore offers high
levels of flexibility for a long lasting durable finish. Ideal for areas that
are subjected to frequent heavy use eg. car parks, stairs, walkways, high
traffic public areas, and industrial work areas. Contains Dolomite stone to
provide anti-slip properties. This product has a very fine textured, almost smooth,
finish. Suitable for external areas such as driveways, pavements and balconies.
Click here to view the slip resistance test certificate.
Heavy Duty Elastomeric Floor Coating (Anti Slip) 5L
A blend of high quality thermo-acrylic and polyurethane
resins resulting in a heavy duty coating that offers excellent protection for
high traffic areas. This product is Elastomeric and therefore offers high
levels of flexibility for a long lasting durable finish. Ideal for areas that
are subjected to frequent heavy use eg. car parks, stairs, walkways, high
traffic public areas, and industrial work areas. Contains Dolomite stone to
provide anti-slip properties. This product has a very fine textured, almost smooth,
finish. Suitable for external areas such as driveways, pavements and balconies.
Click here to view the slip resistance test certificate.
HD Thinners
Thinner for use with Heavy Duty Elastomeric Floor Coating.
Kitchen and Bathroom Paint 2.5L
A superior water based emulsion with an anti mould additive.
Specifically suited to areas with high humidity and condensation which can lead
to the growth of mould and bacteria. The finish is extra durable and washable.
Coverage 12 sq m per litre.
Liming Wax 450ml
High quality traditional liming wax. Designed to provide a
liming effect on bare or suitably painted timber. Manufactured in the UK by
FLAG Paints Ltd.
MDF / Acrylic Primer 1L & 2.5L
A water based quick drying acrylic primer suitable for new
or bare MDF, timber, plaster and masonry surfaces. Over-coat with water based
or conventional white spirit based topcoats. Recommended for applications where
speed of application and/or low odour during the drying process is important.
Coverage: 12m² per litre.
Natural Waxes
One Coat Gloss (White) 1L & 2.5L
A high quality one coat alkyd resin gloss system. Suitable
for all wood surfaces and also metal. Suitable for use over a wide range of
conventional single pack solvent based primer/undercoat paints. Made in the Uk
by FLAG Paints Ltd. Coverage 15m² per litre.
Patent Knotting Solution 500ml & 5L
Traditional shellac based sealer for resinous knots on
timber. Ideal for restoration purposes. Provides ongoing protection against the
resin of knots. Formulated to seal knots and prevent resin seepage. Very
popular for use on pine. Manufactured in the UK by FLAG Paints Ltd.
Premium Smooth Masonry Paint 15L
A high quality waterbased smooth masonry paint. Manufactured
using a blend of premium quality resins for extra strength and flexibility.
Provides excellent protection against adverse weather conditions. This product
is part of the FLAG premium range. No primer required simply thin with up to
10% water if applying on bare or absorbent surfaces. A high quality
obliterating water-based matt smooth masonry paint with extra strength and
flexibility. (supplied as 3 x 5 litre). Coverage 8-12 sq m per litre. Manufactured
in the UK by FLAG Paints Ltd.
Premium Fine Textured Masonry Paint 15L
A high quality waterbased fine textured masonry paint.
Manufactured using a blend of premium quality resins for extra strength and
flexibility. Provides excellent protection against adverse weather conditions.
This product is part of the Flag premium range. No primer required simply thin
with up to 10% water if applying on bare or absorbent surfaces. (supplied as 3
x 5 litre). Coverage 8-12 sq m per litre. Manufactured in the UK by FLAG Paints
Ltd.
Polyurethane Floor Paint 5L & 20L
Polyurethane floor paint based on a high quality resin
system with a tough smooth finish. It is suitable for application to most
surfaces and will provide a hard wearing, water and oil resistant finish, this
product is ideal for factory and garage floors. It is only necessary to seal a
porous substrate such as new or bare concrete. A sealer coat is achieved by
adding 10% white spirit to the paint. Please note new concrete floors can only
be painted after 6-8 weeks. Manufactured in the UK by FLAG Paints Ltd.
Pure Button Polish 500ml & 5L
Button shellac is hand made from the villages around
Calcutta, it is therefore less refined than machine made shellacs, however this
gives added strength to the polish film and for this reason is often used as a
finishing coat for a sealing stain. A useful polish to have in the workshop,
but should be used with discretion due to its colour. Avoid using it over
darker wood as it gives a cloudy appearance and tends to hide the grain. The
golden appearance will enhance some woods for example, Walnut. Based on a
traditional shellac recipe. Manufactured in the UK by FLAG Paints Ltd.
Pure Shellac Varnish 500ml & 5L
Pure shellac varnish is a heavy duty finish mainly used
where a traditional French polish is not required. It has excellent water
resistance and when dried is free from chemicals and solvents. Suitable for use
on packing boxes and furniture.Heavy-duty shellac finish used where a
traditional french polish finish is not required. Provides an amber gloss
finish. Manufactured in the UK by FLAG Paints Ltd.
QD Polyurethane Varnish (Gloss & Satin)
Tough finish for doors, window frames, furniture and
floors. Drying time 1-2 hours. Recoat
time 4-6 hours. Hard wearing polyurethane varnish for interior or selected
exterior use. This tough quick drying polyurethane clear varnish is based on a
high quality resin system giving excellent durability, it is hard-wearing and
suitable for a wide range of areas including wooden flooring, furniture, doors
and general woodwork. Available in Gloss & Satin finishes. Theoretical
spreading rate 16 sq. metres per litre.
QAD Gloss 5L (special order/batch quantity item)
A quick air drying enamel based on high quality polyurethane
and alkyd for the high levels of durability and flexibility. FLAG Anti
Corrosive QD Primer is recommended for use with this product. This is a tough
industrial paint with rapid drying properties which permit short down times
when rapid handling of components is required after painting.
This product is a special order item with a minimum batch
quantity of 150 litres. Available in a wide range of colours.
Raw Linseed Oil 500ml & 5L
Raw Linseed Oil can be used to penetrate and feed wood. Also
useful for softening putty and as a lubricant when French Polishing, and a
general purpose medium. Manufactured in the UK by FLAG Paints Ltd.
Red Oxide QD 5L
A high build oxide primer with quick drying properties. An anti-corrosive primer suitable for either
brush or spray application. The primer
gives excellent adhesion to ferrous metals.
Can be over coated at any period of time after the recommended drying
time. Suitable for use with a wide
variety of top coats. Normally a special order only item.
Rust Converter 250ml
A water-based heavy duty rust cure. Paint on to neutralise
rust and form hard black coating. Over-paint using standard solvent based
paints. Prevents rust re-occurring. Water-based. Quick drying and easy to use.
(previoulsy stocked by Screwfix) Manufactured in the UK by FLAG Paints Ltd.
Satin Paint (White) 1L & 2.5L
A superior alkyd topcoat reinforced with polyurethane resin.
For all general wood and metal surfaces. Undercoat with FLAG Trade
Primer/Undercoat. For interior and exterior use. Manufactured in the UK by FLAG
Paints Ltd. Coverage sq. m. per litre.
Primer Undercoat (White) 1L & 2.5L
A one coat obliterating alkyd resin white primer/undercoat
suitable for wood and metal. Designed to be over coated with FLAG Trade Gloss.
Also suitable for over coating with other traditional single pack solvent based
paints. Coverage: 15 sq. m. per litre.
Premium Shed & Fence Treatment 5L
(previously sold by Screwfix) High quality satin based wood
finish. Based on premium quality flexible resins. Protects and water-proofs
timber. Light fast pigments give a long lasting durable finish. Part of the
FLAG Premium range, Extra Opacity, Premium Quality and Extra Strong. No primer
required. A bulk/special order only item.
Shellac Sanding Sealer 62 Pale 500ml & 5L
A shellac sanding sealer made from a blend of shellacs and
zinc stearate which is ideal for sealing new or stripped wood prior to waxing
and french polishing. Manufactured in the UK by FLAG Paints Ltd.
Smooth Metal Paint
Quick drying gloss finish for metal substrates. Ideal for
gates, railings etc. Solvent based and easy to use for rapid long lasting
protection. Quick air drying gloss finish gives a hard durable finish to metal
substrates. Provides excellent protection when used in conjunction with QAD
Anti Corrosive Oxide Primer. Economical and easy to apply. Suitable for a wide
variety of applications where speed and ease of application are required.
Coverage: 12m² - 15m² per 1L.
Special Pale Polish 500ml & 5L
A high quality polish made from the finest bleached dewaxed
shellac. Most suitable for finishing items such as inlay and marquetry in view
of its clarity of film. Manufactured in the UK by FLAG Paints Ltd.
Spirit Stain 5L
Interior stain for bare wood. High quality spirit based
stains. Light fast stains for use on furniture or floors prior to polishing or
waxing. Manufactured in the UK by FLAG Paints Ltd.
Stabilising Solution
Clear stabilising and penetrating sealer to bind friable and
chalky substrates prior to coating with masonry paint. Coverage: 8-10m² per
litre.
Swimming Pool Paints 5L
Chlorinated rubber and acryclic based products. A
bulk/special order only item. Details on request.
Xylene (T10009) Thinner
A general purpose solvent for thinning paints, and cleaning
tools and equipment etc. Manufactured in the UK supplied by FLAG Paints Ltd.
Tannin Blocker 5L
A specialist water-based coating designed to encapsulate
tannin in timber. A bulk/special order item. Details on request.
Teak Oil 500ml & 5L
A blend of natural oils and gum turpentine, for use on
garden furniture etc. To nourish dry wood. Teak Oil. Ideal for protecting
garden furniture. Teak Oil Preserves, protects and revives wood by replacing
the natural oils. Manufactured in the UK by FLAG Paints Ltd.
Tile Paint (Bulk/Special order only)
A unique single component, one coat* paint for tiled
surfaces. Flag Tile Paint is made using a special blend of resins producing an
easy to apply product, with excellent adhesion, colour retention, water
resistance and durability. The product is ideally suited for home** kitchen and
bathroom areas. Designed to produce a high quality finish with minimal brush
marks. Grouting can be coloured using a purpose designed grout pen. A
bulk/special order only item.
Factory Floor Paint
Loading Dock Paint
Fuel Storage Paint
Marine Deck Paint
Industrial Wall Paint
Storage Tank Coating
Planter & Garden Wall Paint
Factory Floor Marking Paint
Airport Runway & Apron Marking Paint
Marine Dock Paint
Roadside Marking Paint
Bridge Deck Marking Paint
Parking Garage Paint
Tunnel Paint
Farm Equipment Paint
Playgrounds and Sports Courts Paint
Skateparks and Bike Lanes Paint
Swimming Pool Paint
Scaffolding Paint
Skip Paint
Barn Paint
Cladding Paint
